These Four Points Are Especially Important When The Sealing Machine Is Operating

Sealer website frame

In the packaging industry, whether the sealing machine or any other equipment is not operated blindly when operating, but there are certain steps, you must follow the correct operating steps step by step to successfully complete the production and packaging work, correct The operation will not only damage the equipment, but also extend the service life of the equipment and enhance the packaging effect of the product. When operating the sealing machine equipment, there are four points that are particularly important. What are the four points? Let me introduce.

First: When we use the sealing machine equipment, if we find that there are dirt on the heating block of the equipment and there are stolen goods in the sealing place, we must stop the operation of the equipment and remove the stolen goods. When the temperature of the device is too high, do not touch the booty directly with your hands;

Second: When debugging the temperature of the film, the temperature should be gradually increased from small to high until the sealing temperature of the film is suitable. Remember that the temperature cannot be adjusted from high to low, otherwise it is easy to burn off the heating wire, burn the electric tape and gum;

Third: When the device is not sealing the product, it is strictly forbidden to idle the device. When the device is not operated for a long time, the operation of the device should be shut down in time to avoid wasting resources on the device. When the sealing machine equipment is working, do not put your hand on the high-temperature high-temperature cloth to avoid injury;

Fourth: When the sealing machine is not used for a long time, it should be cleaned regularly to prevent dust from contaminating the equipment;

The above are the four points of sealing machine equipment that are particularly important during operation. You must pay attention to the following four points. Operate the equipment strictly and correctly according to the operating steps to better extend the service life of the equipment and save the manufacturer some costs on the equipment.