Aluminum Foil Sealing Machine Using Note

Important using notes of aluminum foil sealing machine as following:

1, this machine is not suitable for metal container and metal cover, but not on the metal surface by pressing the start button, otherwise it will damage the machine.

2, before the power supply must be inserted into the induction air plug, and the lock screw.

3, the machine uses a single phase three wire power supply line, in order to make the operator safe, be sure to use a single phase three wire power outlet, the ground must be dry, to keep the insulation.

4, the machine is equipped with automatic overheat protection function, when the internal temperature of the machine, the buzzer sounding “abnormal protection (PRO. MD.)” the yellow indicator light, you should turn off the power switch, standby cooling buzzer to stop, and then continue to work.

5, the work process should always check whether the touch sensing head surface, such as overheating, found hot should stop heating, cooling after work (cooling can not power off), “ready (WARM UP)” the green light does not shine, do not press the start button, to avoid false triggering. When the machine is finished, please turn off the power switch on the panel.

6, the machine is equipped with a fuse 5A, not more than 5A insurance replacement.