Attention to Hand-held Aluminum Foil Sealing Machine

9 attentions for hand-hold aluminum foil sealing machine:

1, this machine is not suitable for metal container and metal cover, but not on the metal surface by pressing the start button, otherwise it will damage the machine.

2, before the power supply must be inserted into the induction air plug, and the lock screw.

3, the machine uses a single phase three wire power supply line, in order to make the operator safe, be sure to use a single phase three wire power outlet, the ground must be dry, to keep the insulation.

4, the machine is equipped with automatic overheat protection function, when the internal temperature of the machine, the buzzer sounding “abnormal protection (PRO. MD.)” the yellow indicator light, you should turn off the power switch, standby cooling buzzer to stop, and then continue to work.

5, the work process should always check whether the touch sensing head surface, such as overheating, found hot should stop heating, cooling after work (cooling can not power off), “ready (WARM UP)” the green light does not shine, do not press the start button, to avoid false triggering. When the machine is finished, please turn off the power switch on the panel.

6, the machine is equipped with a fuse 5A, not more than 5A insurance replacement.

7, the machine has a high pressure, the floor is charged, it is strictly forbidden to repair, so as to avoid the body electric shock.

8, use before the discovery of a wire exposed should stop using this machine, to be used for maintenance.

9, the equipment transportation, storage, use can not impact, weight, moisture.

Note: the machine is equipped with limiting current protection, when the sealing foil area is too large, or too close to the induction coil, automatic shutdown output, built-in buzzer sound panel (PRO. MD.) to protect the “abnormal” yellow light, until the resumption date