Ink Roller Printing Sealing Machine Application Method

Ink roller printing sealing machine application method as following:

1. Put the power supply into a 220V power outlet, open ink printing sealing machine power switch, indicator lights, means the power has been turned on.
2. According to the thickness of the plastic is sealed, choose a suitable heating time, the calibration knob referring to a relative value, the greater the value the longer the heating time. Thus, the thicker plastic bags, sealing requires longer otherwise shorter.
3. Choose a suitable cooling time according to the sealed products appearance requirements. The longer the cooling time is the appearance of the sealed products is good but relatively will reduce the production efficiency, and vice versa.
In addition, if the joint of high temperature belt be laxity, and severe damaged and do not clean,dirty, the operation is not synchronized with the traction wheel, sometimes it issued a “squeak” sound. The solution is replaced with the hot zone with same specification.
Replacing the ink wheel printing sealing machine high temperature has a certain skill. First compress wheel spring with hands,and put a head of a high temperature belt on the tire, and the other head is leaning against another tire, the governor is set to low speed, once start, relying inertia, the high temperature belt was automatically be installed.
Sometimes “squeak” sound is caused by a DC motor. It may be the motor bearings is short of oil. In this case, it should be removed and lubricated, sound can be eliminated.
Standard Ink Roller Printing Sealing Machine iron gear, machine more durable, more suitable for capping operation workload situations. Also with a printing device, the seal while also directly printed on the name and trademark, the date of manufacture or expiry date, check number, batch number and so on. Printing and sealing is done by the same time, date, batch number need to replace, easy to use.