Automatic Capsule Filler Machine

Automatic capsule filler machine , the filling speed is fast, the size difference is small,make the loading powder capsule shell finishing,capsule cap finishing,capsule kit integrate into a whole body,compact and convenient.The capsule filler machine has many advantages, such as high speed, high efficiency, simple operation, easy maintenance, low power consumption and so on,it is the the preferred capsule filler machine by the hospital preparation room, health care products, pharmaceutical factory.

Exterior dimension:1000X500X950

Production capacity:20000 / h

Voltage:220V 50Hz 300W

Operation procedure of capsule filler machine:

1.Press the the green button of the “power switch” , turn on the power.

2.Slowly adjust the “vibration intensity adjustment knob” ,Clockwise rotation.At this time ,the finishing plate that associated with “Vibrobearings” starts vibrating,touch the finishing plate, with the feeling to adjust to a certain intensity of oscillation.

3.Put the powder capsule shell into the capsule shell finishing plate，about 300 grains per time.Put the capsule cap into the capsule cap finishing plate，about 300 grains.Finishing plate with plexiglass plate production,there are many large drilled small funnel-shaped hole, the hole diameter and the number corresponding to the diameter of the capsule.

4.In about 30 seconds, the powder capsule shell and the capsule cap cover are dropped into the round hole, and the opening faces upward.In case of individual openings down, can be used to gently press the cap cover cap, you can set it.

5.Horizontal hand held powder capsule shell plate,gently push the lower part of the finishing plate，After finishing the plate, the powder capsule shell will fall into the hole of the connecting plate, and then the connecting plate will be taken out.In the same way, the capsule cap is taken out of the capsule cap.

6. Can be prepared in advance a bottom area of 500 * 500mm2, powder quadrate dish of the four sides about 10mm, the inner pack powder will be loaded powder capsule shell connected flat on the powder quadrate dish. The random distribution of the organic glass frame cover in powder filling capsules connecting plate, with handfuls of bucket shovel powder into the box, with the edges of the frame of a scratch can be filled with powder, and the excess powder scraped.

7.With a random match of the capsule cap cover plate (figure in the end of the draw, a round hole on the package board), on the capsule cap cover plate, there is a hole, it is easy to place. Flip the capsule cap cover connecting plate and the capsule opening down, set in the packed powder loading powder capsule shell connecting plate and counterpoint holes, it is easy to set.

8.The capsule has nested plate into the “capsule cap molding board” below the cavity, pulled down by hand “lever” and place, without excessive force beware, because there is a high degree of positioning mechanism pressure under control. Remove the cover plate he capsules, the capsule can be poured.