Analysis Of Common Faults Of Plastic Bag Sealing Machine

Sealer website frame

Regardless of whether the plastic bag sealing machine equipment of any manufacturer is high or low in price, the quality is good or poor. Operation errors and some special reasons will affect the sealing effect of the sealing machine and there will be some unnecessary glitches. Then when we How to find the cause and solve it when encountering equipment failure, let's analyze it for you in detail.

Fault one: The machine conveyor is off

Reason: Conveyor adjustment button is not adjusted properly;

Exclusion method: Conveyor belt is to the left, tighten the knob on the left, loosen the knob on the right;

Trouble two: The machine seal is off

Cause: The sealing band is adjusted too loosely, and the adjustment screw is incorrect;

Remedy: Adjust the tensioner not to be too tight, and adjust the adjustment screw carefully;

Failure three: The machine seal is not secure

Reason: The temperature is too low and the speed is too fast;

Exclusion method: heat up, reduce speed appropriately;

Malfunction 4: Machine printing is unclear

Reason: the printing pressure is adjusted too fast;

Remedy: Press the pressure button tightly;

Fault 5: The sealing machine has induction or leakage

Cause: Leakage of electric wire from ungrounded wire;

Remedy: Connect the three-pronged ground wire and replace the heating pipe.