This Is How The Pliers Sealer Is Used And Maintained

When using the hand-held sealing machine, we first turn on the power, adjust the appropriate temperature according to the thickness of the sealing material, put the plastic bag on the sealing surface, and then press the handle, and the device current will be The heating time is automatically controlled. When the indicator of the pliers sealer goes out, the phone will automatically disconnect. After about 1-2 seconds, release the handle and the seal of the plastic bag will be sealed. A plastic bag is sealed.

Compared with other sealing machine, the maintenance of the hand-clamp sealing machine is not so strict, but the most basic thing is to keep the sealing surface clean at all times to avoid the leakage of debris, which affects the life of the sealing machine and the sealing effect. Remember not to wipe the sealing surface with a damp cloth, these are the most basic things to do.

If the sealer is not strong, it may be because the heating time is too short, we can turn the knob clockwise to extend the heating time. When the plastic bag is stuck on the rubber pressure plate, it means that the cooling time is still not enough. It is necessary to extend the cooling time after the indicator light goes out. If the gasket under the sealing electromechanical belt is damaged, it will cause a short circuit and damage the electric belt. Therefore, when replacing the heating belt, we must check whether the gasket is intact, and if it is damaged, we must promptly renew it.