Operating Method and Attention of Hand Impulse Sealer

Sealing machine is a very common, easy to operate, used for sealing equipment. According to the operation mode, sealing machine is divided into many kinds of. Below, a brief introduction of the use of hand-held sealing machine and the matters needing attention:

Operation method for hand impulse sealer:

1, select a platform, the sealing machine flat on the top.
2, hand plug into the socket.
3, power line plug is inserted into the socket, the chassis and the other end is inserted into the power socket, please be sure to use the single-phase power supply cords.
4, open the rear plate of the chassis of the power switch, press the button on the panel, to be on the panel of the green indicator lights brighten, the machine can start work.
5, press and hold the settings button, set the appropriate value, generally between 0.5-2.0 seconds.
6, an inductive head is placed at the top of the container cover, click on the handle to the start button, and then heated until the red indicator light, said is heated, and the inductive head don’t move, until the red indicator lamp is off and remove the sensor head, and the green indicator lights or machine Ming, a container sealing work.
7, check the sealing quality, according to different materials and container diameter and production efficiency, appropriate adjustments to the settings, sealing the best quality.

hand impulse sealer use note:

1, the machine does not apply to metal containers or metal cover, otherwise it will damage the machine.
2, before the power must be inserted into the induction type air plug, and lock the screw.
3, the machine uses single-phase three wire power supply line, in order to make the operator safety, be sure to use the single-phase three wire power socket, the ground should be dry and keep the insulation.
4, working process should always touch the surface of the sensing head, check whether the overheating, found overheating should stop heating, cooling to work (not a cooling power).