Operation Steps Of Hand Plastic Bag Heat Sealer

Hand plastic bag heat sealer is a machine which can seal the container with packing material.After the product is packed into the container,in order to keep the product sealed, keep the product quality, avoid the loss of the product, need to seal the container.This operation is through the power, the product is put on the machine, gently press,and finish sealing by the hand plastic bag heat sealer.

The hand plastic bag heat sealer does not need the power supply switch, and the AC power supply line is inserted into the socket.According to the thickness of the material to be sealed by the hand plastic bag heat sealer, adjust the heating time.The plastic bag is placed on the sealing surface, and then the handle is pressed, and the electric circuit automatically control the heating time.When the indicator light goes out, the power supply is automatically disconnected.After about 1-2 seconds, release the handle, the seal better.Work of hand plastic bag heat sealer finished.

If appears damaged at sealing joint when the hand plastic bag heat sealer work,that’s because the heating time is too long.Please turn the knob to the counter clockwise direction to shorten the heating time.

If the seal is not solid, it is because the heating time is too short,Please turn the knob clockwise and extend the heating time.If the plastic bag is glued to the rubber pressure plate,it is because the cooling time is not enough.Must extend the cooling time after the indicator light go out.Please release handle a little bit late.

After the heating time of hand plastic bag heat sealer is adjusted, should be kept unchanged during the using and do not have to make any adjustments in continuous use.

The hand plastic bag heat sealer machine can always plug the AC power supply line on the power socket, no power consumption when not sealed.