Packing Machine Four Steps Of Operation

Packing machine four steps of operation

1. Place packing machine materials
First of all, we need to prepare the materials of the packaging machine, such as your product, your packaging container, product materials, etc., and put them in the appropriate position for the normal use of the packaging machine.
Points to note:
It should be noted here that before using the packaging machine, it is necessary to ensure the cleanliness of the packaging machine, especially the packaging machine with filling technology, which is easy to collect dirt and cause secondary pollution of the product. In addition, the packaging container should be suitable for the size of the packaging machine.

2. Turn on the power switch of the packaging machine
After we have prepared the materials and containers used by the packaging machine, we will turn on the power switch of the packaging machine and officially start the packaging machine.

Points to note:
It is important to note that before turning on the power switch of the packaging machine, it is necessary to check the power line. If the power line is exposed, it is necessary to replace the power line in time, otherwise it is easy to cause the risk of leakage and damage the packaging machine equipment.

3. Parameter setting of packaging machine

After the power supply of the packaging machine is connected, the touch screen of the packaging machine will also start. We should click to enter the parameter setting of the packaging machine, and set the temperature, sealing time, sealing speed, filling capacity value and other parameters according to the instructions of the packaging machine, so as to ensure the normal use of the packaging machine.
Points to note:
Here, it is necessary to note that the parameters of the packaging machine must be set according to the instructions of the packaging machine. For example, the sealing temperature of the packaging machine is 200 degrees. If the setting temperature is lower than 200 degrees or higher than 200 degrees, there will be sealing bubbles, or the sealing film is not correct.

4. Start the packaging machine
After everything is ready, the packaging machine can be officially started. Directly press the "Start" on the main menu, the packaging machine can operate normally!

Points to note:
In the process of starting the packaging machine, we should observe the temperature of the machine at any time. If the temperature is too hot, we should stop the operation and wait for the packaging machine to cool down for half an hour before the operation, so as to avoid the failure of the packaging machine equipment caused by too high temperature. In addition, if the packaging machine in the process of operation abnormal sound, should immediately close the packaging machine, to be checked and repaired before starting.