The Continuous Band Sealer Needs Regular Cleaning And Maintenance!

The continuous band sealer needs to regularly clean the surface of the machine table, the bottom plate and the lower mold slide, groove, inner mold pressure plate and positioning rod (Note: the power must be turned off and normal temperature must be restored).

The lower mold sliding plate, pressure bar bearing, eccentric wheel and guide post, guide rail and other transmission parts are regularly greased to ensure the performance of the machine.

To clean the tooth knife: First plug the two drain holes of the lower mold with a cotton ball, pour boiling water into the groove of the lower mold until it is full, then push the lower mold slide into place, press down the upper mold, press At the lowest point, let the tooth knife soak for a few minutes until it is clean, and repeat several times.

Heat-sealed bags are widely used in daily chemical product packaging, food and drug packaging and other fields. Since the heat seal of the packaging bag is most likely to leak when the product is filled, and most of the damage to the bag occurs in the heat sealing part during actual use, choosing the appropriate heat sealing material and heat sealing parameters can reduce the waste of the production line Rate, and can effectively improve the overall barrier performance of the package.

Hot-press continuous band sealer is to heat the material at the sealing position in a certain way to make it viscous and then pressurize it to seal it. It is usually done with a hot-press sealing device or a hot-press sealing machine. The heat sealing head is the executive mechanism of heat and pressure sealing. According to the structure of the heat sealing head and the heating method, the method of heat sealing can be divided into: ordinary heat sealing method, fuse sealing, pulse sealing, ultrasonic sealing There are several types of sealing, high frequency heat sealing, and induction heat sealing.

The properties of the film are different, and the applicable heat continuous band sealer methods are also different. For example, ultrasonic sealing and high-frequency heat sealing are more suitable for films that are easily deformed by heat. However, the most commonly used heat sealing method is the common hot sealing method. There are several types of common heat and pressure sealing methods: flat heat sealing, disc heat sealing, belt heat sealing, and sliding clip sealing. The application of flat heat sealing is the most popular.