Proper Steps For Pedal Continuous Band Sealer

The pedal continuous band sealer uses electric pulse sealing technology, which can shorten the original working time from 2-4 seconds to 0.2 seconds, with a long sealing length and simple operation. It is an economical sealing device. Correct operation can make The sealing effect is better. The following are the correct operation steps of the pedal sealing machine. Careful reading will greatly help future use.

1. Insert the power plug into a power outlet and turn on the continuous band sealer power switch.

2. Adjust the temperature of the sealing machine, and control the temperature between 200 ° C and 300 ° C. Adjust the temperature according to different products to ensure that the sealing edge does not wrinkle and can be sealed tightly.

3. Please step on the machine 8-10 times before continuous band sealer the product.

4. Place the product to be sealed on the sealing machine and press the foot switch to seal. If the sealing is not good, repeat the steps “2” and “3” to make the sealing meet the product requirements.

5. Please clean up the continuous band sealer after production.