The Installation Of The Sealing Machine Is So Simple

The installation of the sealing machine is actually so simple. When I saw the sealing machine equipment before, it was very tedious and difficult to install. Have a miracle.

One: wear film

(1) Turn off the power first, check the winding direction of the adhesive film through the adhesive film to get the adhesive film, and then place it on the adhesive film rod in a counterclockwise direction to fix it.

(2) Pay attention to whether the front and rear fixing splints of the sealing machine are tightly combined with the film. If they are not tightly connected, use a utility knife to cut the inside of the paper tube at an oblique angle before putting it in.

(3) After putting on the adhesive film, stick the adhesive film firmly on the receiving paper tube with adhesive tape.

Two: sealing operation steps

(1) First turn on the power and turn on the power switch. The indicator light is on. After setting the temperature controller to the pre-determined temperature, you will see the green heating lamp on. When the hot plate on the device reaches the expected temperature, the red constant temperature indicator light will be on. When the sealing machine is working, the electric heating device will continuously alternate in the heating and thermal insulation state, and the green and red indicators will continue to alternately display. This is normal phenomenon.

(2) Put the plastic cup on the lower mold slide, push the lower mold slide into the correct position by hand, press the handle of the sealer down to the maximum stroke, and maintain the pressure for 1--2 seconds Clock, then slowly raise the handle and push it to the starting position.

(3) Finally, pull out the slide of the lower mold, take out the plastic cup inside, put it in the final sealing plastic cup, and perform another cycle.

After reading the introduction above, do you think that the installation and operation of the sealing machine is very simple? The sealing machine equipment is not only simple to install and operate, but also has powerful functions. It has made meticulous contributions to bagged food on the market. Accelerating the efficiency of food packaging, but also boosting the economy of enterprises.