Sealing Machine Features And Methods Of Use

(1) High-speed sealing, used with the assembly line, suitable for the production of large-volume products in the assembly line;

(2) This equipment has no conveyor belt and is used exclusively for occasions where the assembly line has a conveying process;

(3) The height of the sealing bottle is adjustable, and it can be applied to bottles of various heights. The equipment works continuously and the operation is simple;

(4) Two sets of movements in the machine, two sets of power amplifiers, capable of outputting large power current, good sealing quality, and satisfying high-speed sealing;

(5) Optional automatic aluminum foil-free bottle rejection device, automatic sealing bottle counter;

(6) All stainless steel mold shell, beautiful and generous, stable and reliable performance, in line with GMP standards.

Method of use Before starting the machine, place the bottle to be sealed under the sealing box, and turn the lifting wheel so that the gap between the bottom surface of the sealing box and the bottle cap is about 1~2mm.Then press the start/stop switch 5 to "start", the conveyor belt starts to rotate, and then put several identical bottles on the conveyor belt to check whether the bottle can pass the seal smoothly.Below the mouth box (note: the gap between the bottle cap and the bottom of the seal box is 1 ~ 2mm, should not be too large, should not be too small). If the bottle cap touches . For the sealing box, the lifting wheel needs to be adjusted so that the bottle can smoothly pass under the sealing box on the conveyor belt.